HMS Gorgon (1871)
 Right elevation plan from Brassey's Naval Annual 1888–1889
| |
| History | |
|---|---|
 United Kingdom | |
| Name | HMS Gorgon |
| Namesake | Gorgon |
| Builder | Palmers Shipbuilding, Jarrow |
| Cost | £141,254 |
| Laid down | 5 September 1870 |
| Launched | 14 October 1871 |
| Completed | 19 March 1877 |
| Commissioned | April 1872 |
| Out of service | 1901 |
| Refit | 1888–89 |
| Fate | Sold for scrap 12 May 1903 |
| General characteristics | |
| Class and type | Cyclops-class breastwork monitor |
| Displacement | 3,480 long tons (3,540 t) |
| Length | 225 ft (68.6 m) (p/p) |
| Beam | 45 ft (13.7 m) |
| Draught | 16 ft 3 in (5.0 m) (deep load) |
| Installed power | 1,709 ihp (1,274 kW) |
| Propulsion | 2 shafts, 2 direct-acting steam engines |
| Speed | 11 knots (20 km/h; 13 mph) |
| Range | 3,000 nmi (5,600 km; 3,500 mi) at 10 kn (19 km/h; 12 mph) |
| Complement | 156 |
| Armament | 2 × twin 10-inch rifled muzzle loaders |
| Armour |
|
HMS Gorgon was the first ship commissioned of the four Cyclops-class breastwork monitors built for the Royal Navy during the 1870s.
Design and description[edit]
The Cyclops-class ships were modified versions of the Cerberus class.[1] The ships had a length between perpendiculars of 225 feet (68.6 m), a beam of 45 feet (13.7 m), and a draught of 16 feet 3 inches (4.95 m) at deep load. They displaced 3,480 long tons (3,540 t). Their crew consisted of 156 officers and men.[2] Gorgon had two 4-cylinder horizontal direct-acting steam engine, each driving a single propeller shaft. The engines produced a total of 1,670 indicated horsepower (1,250 kW) during the ship's sea trials which gave her a maximum speed of 11 knots (20 km/h; 13 mph). They carried 250 long tons (250 t) of coal,[3] enough to steam 3,000 nautical miles (5,600 km; 3,500 mi) at 10 knots (19 km/h; 12 mph).[4]
The ships mounted four 10-inch rifled muzzle-loading guns in twin-gun turrets fore and aft of the superstructure. The guns could fire both solid shot and explosive shells.[5] They were mounted on carriages that used hydraulic jacks to elevate and depress the guns.[1]
The Cyclops class had a complete waterline belt of wrought iron that was 8 inches (203 mm) thick amidships and thinned to 6 inches (152 mm) at the ends. The superstructure and conning tower was fully armoured, the reason it was called a breastwork, with 8–9 inches (203–229 mm) of wrought iron. The gun turrets had 10 inches on their faces and 9 inches on the sides and rear. All of the vertical armour was backed by 9–11 inches (229–279 mm) of teak. The decks were 1.5 inches (38.1 mm) thick.[6]
Construction and career[edit]
Together with her sister ships, the Cyclops and the Hecate, she was placed on the non-effective list of ships in January 1902.[7] She was sold for scrap the following year.
Notes[edit]
References[edit]
- Ballard, G. A., Admiral (1980). The Black Battlefleet. Annapolis, Maryland: Naval Institute Press. ISBN 0-87021-924-3.
{{cite book}}: CS1 maint: multiple names: authors list (link) - Gardiner, Robert, ed. (1979). Conway's All the World's Fighting Ships 1860-1905. Greenwich: Conway Maritime Press. ISBN 0-8317-0302-4.
- Parkes, Oscar (1990). British Battleships (reprint of the 1957 ed.). Annapolis, MD: Naval Institute Press. ISBN 1-55750-075-4.
- Silverstone, Paul H. (1984). Directory of the World's Capital Ships. New York: Hippocrene Books. ISBN 0-88254-979-0.